8. Global AODD Pumps Market Analysis 2013-2017 and Forecast 2018-2028, by Application  8.1. Introduction / Key Findings 8.2. Historical Market Size (US$ Mn) and Volume Analysis By Application, 2013 – 2017 8.3. Current and Future Market Size (US$ Mn) and Volume Analysis and Forecast By Application, 2018 – 2018 8.3.1. Chemical Transfer 8.3.2. Water Transfer 8.3.3. Oil Transfer 8.3.4. Other Low Viscosity Material Transfer 8.4. Market Attractiveness Analysis By Application

Grubbe, who has 40 years of experience working in the chemical, oil and gas industries, including at DuPont, NASA, and for the U.S. military, says “Any time you lose containment; you have an issue that can spiral out of control.” Corrosive chemicals, for example, can burn skin or flesh. Some chemicals are toxic when touched or inhaled. Cyanotic agents, for instance, can be particularly dangerous or even fatal, since they rob the body of oxygen. Many chemicals are flammable as well and can be ignited by even the smallest spark from nearby motors or other mechanical equipment. “There is no such thing as a small fire in my business,” says Grubbe. In addition to cost of cleanup or treating injuries, there are also indirect costs that can be incurred. These include supervisors’ time to document the incident and respond to any added government inspection or scrutiny, as well as the potential for temporary shutdown of the facility. “The indirect costs can be as much as two – four times the direct costs,” says Grubbe. “Not to mention potential liability, workers’ compensation issues, regulatory fines or potential actions from OSHA or the EPA.”

Because of the wide range of chemicals that AODDs can pump, it is imperative to select the right materials of construction for the specific chemistry involved in the process. Misdiagnosed pump configuration can cause more than maintenance and process interruption; it can be a safety issue. Even household chemicals can be dangerous if exposed to a team member when fluids are transferred in the chemical process of diluting them to consumer concentration.

A section dedicated to pricing analysis of AODD pumps has been provided on the basis of Fluid Inlet & Outlet Size on regional fronts. The pricing analysis provides pricing by each configuration for the present scenario. Assumption and key considerations for the same have also been elucidated.

Purchase costs will naturally depend on the size of the pump and the materials of manufacture, but with many manufacturers to choose from, the prices tend to be competitive. However, installation costs are minimal since pumps can be positioned wherever there is adequate space for them, even submerged if the liquid is compatible with the material of the pump and the exhaust is ported out of the liquid.

6. Flex life – Expected longevity of the diaphragm before requiring replacement. Achieving maximum mean time between repairs (MTBR) is a key goal in selecting a diaphragm. However, some materials have inherently shorter flex lives than others even under ideal conditions.

The report segments Hydraulic Balance Diaphragm Pumps companies, types, and its applications as follows:

When configuring a cost-effective pump, aluminium, polypropylene, Geolast, TPE and EPDM need to be high on your shopping list. As variables such as temperature or abrasives become more challenging, using an ultra-high molecular weight polyethylene (UHMWPE), neoprene or nitrile may be required, but this is going to increase the pump’s cost. Other materials that will add to the cost of the configured pump are specialty materials intended to handle the most extreme fluids. These materials include PTFE, PVDF, FKM, Hastelloy and stainless steel. A useful tip is to be open to using a different material when your pump has to be repaired. It might not be necessary to re-order exactly the same material. Consulting a chemical compatibility guide might help to identify other materials that are perfectly suited for the same fluid but come at a lower cost. The most cost-effective materials are Polypropylene, Geolast, EPDM, TPE and aluminium. To conclude, using UHMWPE, neoprene and nitrile will cost more and using PTFE, PVDF, FKM and stainless steel will be the most expensive choices.

The worldwide Custom Assays market additionally conveys a full unique of the financial good and bad times as far as the interest rate and satisfaction is considered. The Custom Assays market report gives an intensive investigation of the noticeable driving elements that are recognized dependent on the end client requests, variable market changes, limiting components and administrative consistency. The strike of the global Custom Assays market is mentioned in the part of those areas, It demonstrates various segments Activity Assays, Elisa Assays, Screening Assays, Conjugation Assay, Competitive Assays, Sandwich Assays, Others and sub-segments Academic and Research Institutes, Biotechnology Companies, Contract Research Organizations, Life Science Industries, Diagnostic Centers, Food and Beverage Companies of the global Custom Assays market. The Custom Assays market report comprises generally proficient parameters, impediments, and furthermore has in detail clarification of the memorable information alongside the broke down present and future patterns that may concern the development.

XploreMR recently published research study on the AODD (Air-Operated Double Diaphragm) Pumps market titled “AODD Pumps Market: Global Industry Analysis 2013-2017 and Forecast 2018-2028” offers a detailed value-volume analysis of the AODD Pumps market along with insights via BPS analysis (US$ Mn), attractiveness analysis and Y-o-Y growth on the basis of diaphragm material of construction, flow rate, application and end use industry. The volume analysis, for AODD Pumps market, has been done in units (i.e. the number of AODD Pumps) covering data for the historical period ranging from 2013-2017 and forecasted up to 2028 with 2018 as the base year.

Allied Market Research, a market research and advisory company of Allied Analytics LLP, provides business insights and market research reports to large as well as small- & medium-scale enterprises. The company assists its clients to strategize business policies and achieve sustainable growth in their respective market domain.

XploreMR recently published research study on the AODD (Air-Operated Double Diaphragm) Pumps market titled “AODD Pumps Market: Global Industry Analysis 2013-2017 and Forecast 2018-2028” offers a detailed value-volume analysis of the AODD Pumps market along with insights via BPS analysis (US$ Mn), attractiveness analysis and Y-o-Y growth on the basis of diaphragm material of construction, flow rate, application and end use industry. The volume analysis, for AODD Pumps market, has been done in units (i.e. the number of AODD Pumps) covering data for the historical period ranging from 2013-2017 and forecasted up to 2028 with 2018 as the base year.